Alloy Grade UNS: C18100 – For Continuous Casting

  • Overview

    Alloy Grade UNS C18100 is specifically designed for use in the continuous casting process. This alloy is known for its excellent performance in applications that require high precision and reliability during casting. Its properties make it a preferred choice for industries that rely on efficient, continuous production methods.

  • Typical Uses

    Heat sinks, continuous cast components.

  • MetalTek Grade

    CHROME ZIRC COPPER

Similar Specifications

Cast UNS: C18100

Cast Grade:

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: n/a

Chromium: 0.40-1.20

Manganese: n/a

Iron: n/a

Copper: 98.45 MIN

Nickel: n/a

Lead: n/a

Tin: n/a

Silicon: n/a

Zinc: n/a

Other: Zr 0.08-0.20; Mg 0.03-0.06

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

NOTES: Typical properties by forging.

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.