Alloy Grade UNS: N06002 – Corrosion and Heat Resistant

  • Overview

    N06002, also known as MTEK ALLOY X, is a nickel-chromium-iron alloy renowned for its exceptional performance in both high-temperature and corrosive environments. This versatile alloy exhibits outstanding resistance to stress corrosion cracking, a common failure mechanism in demanding applications. Furthermore, N06002 excels in high-temperature settings, demonstrating remarkable resistance to thermal shock and cyclic temperature variations. This makes it suitable for applications where components are subjected to rapid heating and cooling or fluctuating temperatures. Its combination of corrosion resistance, high-temperature strength, and resistance to thermal shock makes N06002 a valuable choice for demanding industries where materials must withstand extreme conditions.

  • Typical Uses

    Chemical and food processing equipment, combustor/exhaust, shaft sleeves, and nuclear power components.

  • MetalTek Grade

    MTEK ALLOY X

Similar Specifications

Cast UNS: N06002

Wrought UNS: N06002

Cast Grade:

Military/AMS: AMS 5390

* AMS specifying investment casting.

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 0.1

Chromium: 20.5-23.0

Manganese: 1

Iron: 17-20

Copper: n/a

Nickel: BAL

Lead: n/a

Tin: n/a

Silicon: 1

Zinc: n/a

Other: Mo 8-10; W 0.20-1.00; Co 0.50-2.50

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Solution Anneal

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.