Alloy Grade UNS: CZ-100 – Strong, Tough Alloy

  • Overview

    CZ-100, also known as N02100, is a nickel alloy prized for its exceptional combination of strength, toughness, and chemical resistance. This alloy performs well across a wide range of temperatures, maintaining its mechanical properties even in demanding environments. While its tensile strength is relatively low compared to other nickel alloys, CZ-100 boasts outstanding electrical conductivity, making it a top choice for applications where efficient electrical transmission is critical. Its resistance to a broad spectrum of industrial chemicals further enhances its versatility, making it suitable for challenging environments where corrosion resistance is essential.

  • Typical Uses

    Chemical and food processing equipment.

  • MetalTek Grade

    MTEK CZ-100

  • Poured At:

    Carondelet Division, Sandusky International Division, Wisconsin Centrifugal Division, Wisconsin Investcast Division

Similar Specifications

Cast UNS: N02100

Wrought UNS: N02200

Wrought Grade: NICKEL 200

Cast Grade: CZ-100

Cast ASTM: A494

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 1

Chromium: n/a

Manganese: 1.5

Iron: 3.0 MAX

Copper: 1.25 MAX

Nickel: 95 MIN

Lead: n/a

Tin: n/a

Silicon: 2

Zinc: n/a

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Not Heat Treated

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.