Alloy Grade UNS: CG6MMN – Corrosion Resistance and High Strength

  • Overview

    CG6MMN, known as NITRONIC 50 in its wrought form, is a cobalt-based cast alloy that offers a compelling combination of high strength and excellent corrosion resistance. This austenitic stainless steel exhibits low magnetic permeability, even at low temperatures, making it suitable for applications where magnetic sensitivity is a concern. Its corrosion resistance surpasses that of typical 300 and 400 series stainless steels, providing enhanced protection in a variety of environments. CG6MMN is a valuable choice for applications requiring a combination of strength, corrosion resistance, and low magnetic permeability, making it suitable for diverse industries and demanding conditions.

  • Typical Uses

    Deck equipment, downhole rigging equipment, heat exchangers, pressure vessels, pump and valve components.

  • MetalTek Grade

    NITRONIC® 50

  • Poured At:

    Carondelet Division, Sandusky International Division, Wisconsin Centrifugal Division, Wisconsin Investcast Division

* Produced under license of AK Properties / ARMCO Advance Materials Corp.

Similar Specifications

Cast UNS: J93790

Wrought UNS: S20910

Wrought Grade: NITRONIC® 50

Cast Grade: CG6MMN

Cast ASTM: A351, A743

Typical Chemical Composition (% by wt.)

Aluminum: n/a

Carbon: 0.06

Chromium: 20.5-23.5

Manganese: 4.0-6.0

Iron: n/a

Copper: n/a

Nickel: 11.5-13.5

Lead: n/a

Tin: n/a

Silicon: 1

Zinc: n/a

Other: Mo 1.5-3.0; Nb 0.10-0.30; V 0.10-0.30; N 0.20-0.40

Minimum Mechanical Properties

Tensile, ksi

0

Tensile, MPa

0

Calculated PREn (Minimum)

0

Yield, ksi

0

Yield, MPa

0

Elongation

0%

Heat Treatment: Solution Anneal

Explore Other Alloys

Gears

Non-Ferrous

Non-ferrous alloys are, literally, materials that are not iron-based. While others may provide non-ferrous materials of other materials, the MetalTek family of non-ferrous alloys are copper-based. In general, these materials deliver high strength, and excellent wear and corrosion resistance. They are often found in marine applications and also bushing, bearing, and gear environments.
Stainless Steel Parts

Stainless Steel

Stainless steels owe their ability to resist corrosion primarily to the presence of a passive film on their surface. Chromium is chiefly responsible for formation of the passive film. Iron ceases to rust at approximately 12% chromium content and resistance to oxidizing corrosives increases rapidly with chromium content up to approximately 20%.
Petrochemical Fittings

Specialty Alloys

Specialty Alloys comprise a broad group of materials that deliver properties for more demanding applications, use more exotic or expensive materials, or require special processes to manufacture. Where standard materials may not offer desired performance, specialty alloys (including those that are modified further) may be a sensible selection.