Blog Archives
Nickel Iron Chrome (Ni-Fe-Cr) Alloys. This group includes grades HX and HW. Description These high-temperature stainless steel have the highest nickel content (around 60%) in the high-temperature family. Properties – Why select this material HX and HW provide the highest carburization resistance of the standard alloys. Good oxidation resistance. Good thermal shock resistance. Some Typical…
Read More
Duplex stainless steels are alloys with metallurgical structures generally regarded as being approximately equal parts of austenite and ferrite, with a 60/40, 40/60-phase distribution being the envelope widely considered as acceptable. The combination of austenite/ferrite produces alloys with twice the strength of conventional austenitic stainless steels. Duplex stainless steels are virtually immune to stress corrosion…
Read More
Every material selection decision includes tradeoffs. Performance can come at a price. But there is little sense in paying for capabilities that are not needed. The following suggests a framework for selecting one of a family of corrosion-resistant materials from another.
Read More
Press Release MetalTek International today announced that Chief Operating Officer E.J. Kubick has replaced Bob Smickley as Chief Executive Officer. This is part of the multi-year succession plan that began with Mr. Kubick’s appointment to the COO role in January 2017. Mr. Kubick and Mr. Smickley will both continue to serve on MetalTek’s Board of…
Read More
Every material selection decision includes tradeoffs. Performance can come at a price. But there is little sense in paying for capabilities that are not needed. The following suggests a framework for selecting one of a family of corrosion-resistant materials from another. Comparisons Cost Cost is rarely ignored, so it is helpful to compare certain corrosion-resistant…
Read More
Grade Martensitic Stainless Steels. Description The addition of sufficient carbon to alloys of chromium and iron results in alloys that are true steels in that they can be hardened and tempered. Their structure upon rapid cooling from temperatures above 1600°F / 870°C is chiefly martensitic. Martensitic Steel Properties – Why select this material Magnetic…
Read More
Grade MTEK 943 (C94300) Tin bronze Description Bearing alloy with the ability to operate at high speeds and light loads under adverse lubrication conditions. Properties – Why select this material Where deformation due to bad fit of components is an issue. Good conformability. It has fair strength and wear resistance, but excellent anti-frictional properties. It…
Read More
Penetrant inspection is a popular detection method because it is relatively inexpensive and can be administered on a surface that is oriented in nearly any direction. Penetrant Inspection may take the form of Fluorescent Penetrant Inspection (FPI) or visible Liquid Penetrant Inspection (LPI). Each penetrant testing has its advantages, so the selected method will be…
Read More
Grade MTEK A2 (T90102 / CA2) Tool Steel Description Air-hardening medium-alloy cold work steel Properties – Why select this material Excellent non-deforming properties Wear and abrasion resistance Good machinability in annealed condition Applications – Frequent uses Cold draw dies Rolling dies Grade MTEK A6 Tool Steel Description Air-hardening medium-alloy cold work steel Properties – Why…
Read More
Metallurgically, Bronze is a copper-based metal alloyed with tin, lead, aluminum or other elements to change the material’s physical or mechanical properties. The historic “Bronze Age” stretched from around 3000 B.C. to about 1000 B.C. Early craftsmen found the material easier to deal with than stone for many uses, and more durable than other materials…
Read More